3/32" Diameter 2 Flute 3/8" Cut 1-1/2" Length 1/8" Round Shank Single End Square Uncoated

Top Quality End Mills – Made in North America

For the full selection of carbide end mills, Click Here

 

Brand: Skookum End Mills
Product Code: 4321159
Price: $6.24CAD
Location Availability Min Qty
Skookum End Mills $100 for FREE SHIPPING 9 1
Qty:  
   - OR -   

Discounted Shipping Calculated in the Checkout

Uncoated (Brite) End Mill

• General Purpose
• 30 deg Helix Carbide
• 10% Micro Grain Carbide
• Diameter Tolerances: +0.0000”/-0.0020”

Write a review
Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad            Good

TESTIMONIALS

  • Garry M.
    Blades arrived promptly. Haven't needed to use them yet...
    26/12/2018
  • Craig
    Ordered 3 band saw blades and they arrived very quickly - within the week from manufacture. Have only used one so far and is very good. The only con I have is the twisting tension at the weld. ..
    29/11/2018
  • wayne arnold
    Very speedy service-Very satisfied..
    19/12/2018
  • Terry Dawe
    Great Service which is always a plus !!! ..
    22/03/2018
  • Reuben
    Re-Mov is a remarkable product...quickly breaks the bond between the adhesive and the surface allowing removal without damage to the product or the surface....in my case I had attached a depth sounder to the inside hull of my boat and the sounder failed...I was able to remove it and replace it with ..
    21/11/2022
  • Scott
    I needed custom sanding belts made to sharpen my jointer and planer blades. Ryan's advice was bang on! Super sharp blades in no time, with very little wear on the belts. Good pricing for a custom product. I would definitely use Online again!!!..
    17/07/2020
  • Henry
    The catalog and product supply is great and the products come quickly. The prices are also superb. ..
    17/01/2021
  • John
    Great product, easy on line experience, prompt delivery with notifications...
    15/05/2019
  • Esther
    Bought this set because my drill press simply required blades with shorter shanks than I had. From the first time I tried these new blades I totally loved them. The cuts are clean , perfect, smooth and fast . Best cutting blades I have ever used !..
    16/07/2021
  • Norselig
    I was in a bit of a bind .No bandsaw blades available for my saw . After some online digging i found Online Supply . Custom made blades ! Ordering was super easy ,the price was great , shipped very fast .Best of all great quality product . Thanks ,will definitely recommend your service .Well Don..
    15/05/2020
Skookum Tools Ltd. © 2025