1/4" Diameter 3 Flute 1/2" Cut 2" Length 1/4" Round Shank Single End Square Uncoated

Top Quality End Mills – Made in North America

For the full selection of carbide end mills, Click Here

 

Brand: Skookum End Mills
Product Code: 4321028
Price: $12.02CAD
Location Availability Min Qty
Skookum End Mills $100 for FREE SHIPPING 4 1
Qty:  
   - OR -   

Discounted Shipping Calculated in the Checkout

Uncoated (Brite) End Mill

• General Purpose
• 30 deg Helix Carbide
• 10% Micro Grain Carbide
• Diameter Tolerances: +0.0000”/-0.0020”

Write a review
Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad            Good

TESTIMONIALS

  • Susan Stewart
    Great stuff!.....worked well on outdoor patio!..
    03/06/2020
  • Trainrobber
    Belts arrived very quickly and work fine these are for a very old sander my grand father owned he been gone 35years or so...
    25/03/2019
  • Gary
    The custom bandsaw blades are fantastic as were shipping and delivery. Will order from these folks again...
    28/12/2018
  • Richard Pielou
    Great resaw blade for my 24" Bandsaw. Cuts nice and straight with no fuss!..
    28/08/2020
  • Tom Daluisio
    BOR-27 1-1/16" Diameter Forstner Bit Bormax I ordered two of these because they seem to sell out fast. they work awesome!! purchase was easy, shipping took a little time because I'm all the way in Virginia USA!! but they came as promised!! thanks again!!!..
    06/05/2021
  • Alex
    Very fast service. I ordered 100 grit buffing compound. I usually order from another supplier but their shipping was a crazy price. Got just what I needed in a case lot. Will keep me going for quite a while..
    01/02/2024
  • John Whatman
    I have used the blade several times and it is excellent quality. I especially noticed the smooth joint where it was welded. Service was excellent as well. It arrived faster than I expected...
    16/04/2021
  • Reuben
    Re-Mov is a remarkable product...quickly breaks the bond between the adhesive and the surface allowing removal without damage to the product or the surface....in my case I had attached a depth sounder to the inside hull of my boat and the sounder failed...I was able to remove it and replace it with ..
    21/11/2022
  • Rob
    I bought four Forstner Bits from 2" to 2 1/2". The place that I usually buy them from have been out of a s bunch of sizes all summer. In a search I found Skookum Tools. They had the bits I wanted and with shipping were the same price at the place I buy from. Shipping was on time and the bits were ..
    11/10/2020
  • Dick M
    Ordered 6 sander belts, exactly what I expected and they work fine...
    25/09/2018
Skookum Tools Ltd. © 2025