List No. 5900 - 1"-8 Thread Mill Solid Carbide ALTiN Made In U.S.A.

Brand: Morse Cutting Tools
Product Code: 98623
Price: $889.98CAD $756.49CAD
Location Availability Min Qty
BC Warehouse Out Of Stock 1
Morse Cutting Tools Normally In Stock 1
Qty:  
   - OR -   

Discounted Shipping Calculated in the Checkout

Flute Type ?

For Use With ?

Material ? Solid Carbide

Overall Length ? 4

Pitch Diameter Limit ?

Thread Length ?

Type ? Thread Mill

Write a review
Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad            Good

TESTIMONIALS

  • DARIO
    Gouge blade works great. Good value for the money. Fast shipping. I'm a satisfied customer...
    07/12/2021
  • Island Enterprises
    The router bits I ordered were shipped fast and work great. I will be ordering again!..
    18/10/2023
  • Reuben
    Re-Mov is a remarkable product...quickly breaks the bond between the adhesive and the surface allowing removal without damage to the product or the surface....in my case I had attached a depth sounder to the inside hull of my boat and the sounder failed...I was able to remove it and replace it with ..
    21/11/2022
  • Gord Bates
    I received the 3" x 20" sanding belts as ordered. Test drove one on my old Craftsman belt sander, and was more than satisfied. Previous belts from another supplier broke apart at the tape joint, probably from old stock. The Polish made belts are great, thanks...
    24/09/2023
  • Mayela Sandoval
    Formidable service et matériaux très efficaces, prix abordables...
    26/03/2025
  • Ron Rowan
    The bandsaw blades I purchased are excellent and the shipping process was very fast, thank you will definitely order more when I need them..
    13/12/2018
  • Robert Roger
    Very fast shipping and the blades work very good. Thanks I will order more...
    22/07/2019
  • Kevin Morrow
    My order was exactly what I ordered and arrived prior to the date I was told. This was my first order, I will definitely recommend them and I will use this service again. Thanks!..
    25/09/2022
  • Laurie J.
    Saw blades for a 10" hobby band saw, expeditious delivery, followed break in procedure, Work great. Now my band saw supplier of choice...
    02/10/2019
  • Blaine
    Nice blade (Royce Ayr 12" x 24 tooth x 3.2 mm ATB Proline series ripping blade). Rips 4" oak with ease on a 3 HP saw. Smooth clean cuts with no burning. I compared the performance of this blade to a more expensive Freud blade in ripping the same oak pieces. The Royce blade did a better job. ..
    30/07/2021
Skookum Tools Ltd. © 2025