Home » Drilling & Cutting » Router Bits » Cabinet Making » Rail & Stile Bits » 150R4-31 2 Piece Rail & Stile Bit 2 Flute 23/64" & 5/64" Cutting Height 1/4" Shank 9/64" Radius

150R4-31 2 Piece Rail & Stile Bit 2 Flute 23/64" & 5/64" Cutting Height 1/4" Shank 9/64" Radius

We will confirm stock on Dimar products prior to processing orders.

Brand: Dimar
Product Code: 150R4-31
Price: $142.62CAD $128.36CAD
Location Availability Min Qty
BC Warehouse Special Order - Delivery Varies 1
Dimar Canada To Be Confirmed 1
Qty:  
   - OR -   

Discounted Shipping Calculated in the Checkout

1 13/64" Dia, Carbide Tipped, Classical Rail Bit, 2 Flutes, 1/4" Shank, 2" Length

This ultimate rail and stile bit is recommended for creating doors. The stub spindle and cope cutter configuration are used to make unique door-making router bits. A cap screw secures the counterbored cope cutter to the spindle. The ornate ogee "sticking" along the edges of the stiles and rails is shaped with a matching profile bit. The tenon travels over the top of the bit unimpeded since the cope is cut on the ends of the rails.

  • Carbide-tipped for maximum performance
  • Cuts most hardwood and softwood
  • Can be used on most table-mounted portable routers
Diameter (D) 1 13/64"
Number of Cutters 2
Shank (d) 1/4"
Cutting Length (B) 23/64"
B1 5/64"
Radius (R) 9/64"
Overall Length (L) 2"
Technology Carbide Tipped
Tools Table Router
Material Soft Wood, Hard Wood
 
Write a review
Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad            Good

Continue
Tags: 150R4-31, Piece, Rail, Stile, Bit, Flute, 23/64", 5/64", Cutting, Height, 1/4", Shank, 9/64", Radius, Bits, Dimar

TESTIMONIALS

  • Val
    This riuter bit was perfect. Wood is measured metrically and all my bit were standard. The panels in my new cabinet doors slid in perfectly. Cut dados smoothly..
    13/09/2024
  • Aaron
    I ordered several 91” bandsaw blades for an old wood bandsaw; it is an odd size very hard to find, so I appreciated both the quality of the blades and the price was better than other stuff I saw online; it’s a nicer selection also for blade sizes and tooth count, etc. ..
    04/04/2022
  • Chris. Rochon
    The blade appears to be of excellent quality. The fit is perfect with no alignment problem. I appreciated the attached detail directions for first operation since they are somewhat different than the expected “norm” procedures. It would be nice if a smaller delay in shipping was possible since there..
    17/03/2021
  • wilf
    only place I could find 4" sanding belts for my old sander. Shipping was quick and product was very good. Thumbs up!..
    29/01/2019
  • Jean
    Fast shipping good price good blade cut good..
    29/06/2020
  • Steve Booth
    3/4" round carbide burr double cut - delivered right away - exactly what I needed - job turned out perfect. Thank-you Skookum...
    29/09/2022
  • Tom crann
    Product arrived as ordered good job , am pleased will order from you again thanks..
    31/12/2020
  • Pete
    Order here for the first time, needed a 1/2" couterbore with a 9/32 pilot for light/medium duty job, tool arrived on time and did exactly what i needed to do with only a slight modification to the tool. Good bang for the buck. Good first experience and will certainly consider this as regular source...
    20/08/2024
  • Ken Zorn
    Ordered a Flexback Bamdsaw blade. It arrived within stated time. Cuts in 3&1/4 in thick Birch were extremely smooth and required very little sanding. I would absolutely recommend this company. When needed I will order again from them...
    01/10/2021
  • Maurice Smith
    Little long getting ,but kept in touch all in all very good ..
    29/01/2019
Leave a Review
Skookum Tools Ltd. © 2025