7/16" Diameter x 13/64" Pilot Drill Hole Type C Countersink

Brand: W L Fuller
Product Code: C10
Price: $19.36CAD $16.46CAD
Location Availability Min Qty
BC Warehouse 2 - 3 Weeks 1
WL Fuller Out Of Stock 1
Qty:  
   - OR -   

Discounted Shipping Calculated in the Checkout

Countersink for the heads of screws in woods, plastics, and non-ferrous materials.

A high quality American-made countersink made by WL Fuller. Made of carbon steel & heat-treated, this countersink is very well-built, durable, & cuts into materials well. This type “C” countersink is designed for use in all woods, plastics, & non-ferrous metals. It has four flutes for clean & accurate boring, & a standard 82° cutting angle which will accommodate most bevelled screws.

  • Made of carbon steel & heat-treated for long tool life
  • For use in all woods, plastics, & non-ferrous metals
  • 82° cutting angle head
  • Four flutes for clean & accurate boring
  • Two hex-socket set screws in countersink

The countersink is held in place with two hex-socket set screws fastened into the bit & is easily adjustable up & down the length of the drill bit if the need arises. This countersink can be mounted on taper point, brad point & regular point drills. A very popular item with our customers.

Made in the USA.

Write a review
Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad            Good

TESTIMONIALS

  • Bryce Comer
    Great service & prices...
    17/01/2019
  • Reuben
    Re-Mov is a remarkable product...quickly breaks the bond between the adhesive and the surface allowing removal without damage to the product or the surface....in my case I had attached a depth sounder to the inside hull of my boat and the sounder failed...I was able to remove it and replace it with ..
    21/11/2022
  • Rick
    I looked everywhere for 20 in. grinding belts. I finally found them at Skookum and with the assistance of Ryan was able to put an older grinder back into service. The product was superior and was shipped very quickly to me. I recommend this company ...
    06/11/2019
  • Keith B.
    I'm very impressed with the quality of these carbide end mills. In 40+ years of professional metal working, I've never seen better! I'm also thrilled to see that they are apparently made in Canada. I'm old enough to remember when a lot of high quality things were made here, and we need to revive tha..
    31/05/2022
  • Garry
    So far I’m very satisfied not only with the product but with the delivery and communication. Thanks..
    29/06/2020
  • Pierre Cantin
    faster than expected, everything perfect...
    31/05/2022
  • Tom K.
    The Forstner bit that I ordered works very well and it arrived quickly. Thanks. I will be visiting your site again. ..
    14/01/2021
  • John
    As described and speedy delivery..
    17/09/2021
  • Daavid Beck
    I got what I ordered and it is a high quality product. No complaints ...
    19/11/2022
  • Thomas
    Great bandsaw blades good price and got them a week early good service thanks...
    19/05/2021
Skookum Tools Ltd. © 2024