3/16" Diameter 3-1/2" Long Fast Spiral Taper Drill

 

For a full selection of all of the available sizes, click here!

Brand: W L Fuller
Product Code: 20800187
Price: $26.18CAD $22.26CAD
Location Availability Min Qty
BC Warehouse 2 - 3 Weeks 1
WL Fuller Normally In Stock 1
Qty:  
   - OR -   

Discounted Shipping Calculated in the Checkout

3/16” Standard Length “Fast Spiral” Taper Point Drill

Cuts faster and clears chips better than the general purpose type. This type can only be used in a drill press or other stationary equipment as the cutting action is too aggressive for hand held equipment.

  • Made of High Speed Steel to hold their sharp cutting edges longer. 
  • Made in standard fractional sizes to fit all types of Countersinks and Counterbores
  • Sizes and lengths to match most popular wood screws

Recommended for high production in hard woods.

Made in USA

Write a review
Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad            Good

TESTIMONIALS

  • Cathy Schwartz
    Products came swiftly and exactly as ordered. Very pleased, and will order again...
    19/07/2021
  • Neil
    Order was easy to place and arrived when promised. Items appear to be as ordered and correct but haven’t used them yet...
    04/04/2019
  • Reuben
    Re-Mov is a remarkable product...quickly breaks the bond between the adhesive and the surface allowing removal without damage to the product or the surface....in my case I had attached a depth sounder to the inside hull of my boat and the sounder failed...I was able to remove it and replace it with ..
    21/11/2022
  • Trainrobber
    Belts arrived very quickly and work fine these are for a very old sander my grand father owned he been gone 35years or so...
    25/03/2019
  • LARRY BROOKS
    I use the 624 flap disc...great product. Price is good and delivery is excellent thanks a bunch :) ..
    08/09/2020
  • KENNETH CAMPBELL
    TKS FOR A FAST SHIPMENT 3 DAYS LATER IT ARIVED, MERRY CHRISTMAS TO ALL, ALL THE BEST KEN ..
    21/12/2023
  • Pete
    Order here for the first time, needed a 1/2" couterbore with a 9/32 pilot for light/medium duty job, tool arrived on time and did exactly what i needed to do with only a slight modification to the tool. Good bang for the buck. Good first experience and will certainly consider this as regular source...
    20/08/2024
  • Chris. Rochon
    The blade appears to be of excellent quality. The fit is perfect with no alignment problem. I appreciated the attached detail directions for first operation since they are somewhat different than the expected “norm” procedures. It would be nice if a smaller delay in shipping was possible since there..
    17/03/2021
  • Rich
    Very easy website to browse and order from. Highly recommended!!..
    05/02/2019
  • Ron Chapman
    Was having trouble finding quality 114” fine toothed blades for a Craftex 14” band saw until I found your site. Ordered 2 blades at a reasonable price and even though they had to be manufactured for the order they arrived very quickly. Was very pleased with the quality and cutability of the blades. ..
    28/07/2019
Skookum Tools Ltd. © 2025