1/2" Diameter x 1/8" Pilot Drill Hole Type MS Counterbore 1/2" Shank

Brand: W L Fuller
Product Code: MS081258
Price: $66.29CAD $56.35CAD
Location Availability Min Qty
BC Warehouse 2 - 3 Weeks 1
Qty:  
   - OR -   

Discounted Shipping Calculated in the Checkout

WL Fuller Type MS Counterbore

Designed to cut clean holes in wood and plastic. Can also be used with stop collars. Counterbores for the flat under the heads of nails, spikes, and bolts. Allowing them to be sunk far enough beneath the surface to allow for a wood plug to be used to cover the head. Can be set at any point on a twist drill and held fast with two hex-socket set screws. Designed for clean cutting.

  • Made of Stainless Steel.
  • Have a 3” overall length and are designed for deep counterboring.
  • Can also be used with drill jig bushings.

Made in USA 

Write a review
Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad            Good

TESTIMONIALS

  • Don
    Great service!!! Blades were ordered online and shipped on time, will definitely order from this company again...
    08/02/2019
  • Harold Sattler
    Very happy with the quick service and shipping . Band saw blades I ordered are working fine . ..
    28/08/2019
  • Reuben
    Re-Mov is a remarkable product...quickly breaks the bond between the adhesive and the surface allowing removal without damage to the product or the surface....in my case I had attached a depth sounder to the inside hull of my boat and the sounder failed...I was able to remove it and replace it with ..
    21/11/2022
  • Larry
    Very fast and great service! Will be shopping there more!..
    05/02/2020
  • Marcel A.
    Ordered 2 sets of jointer knives on Dec 5th - received them on Dec 8th. Can't ask for any better. ..
    08/12/2021
  • Don Roach
    Searched everywhere (else) for a blade for my vintage B & B drill driven band saw. Skookum had it and it now cuts beautifully. Shipping was expensive...
    27/01/2024
  • Terry
    Great service ! Good to see the art of customer service is priority ! ..
    31/03/2020
  • Gord Bates
    I received the 3" x 20" sanding belts as ordered. Test drove one on my old Craftsman belt sander, and was more than satisfied. Previous belts from another supplier broke apart at the tape joint, probably from old stock. The Polish made belts are great, thanks...
    24/09/2023
  • Don
    Saw blades were excellent,shipping was excellent also..
    28/12/2018
  • Guy
    Fast shipping and excellent blades ..
    08/12/2020
Skookum Tools Ltd. © 2025