3/8" Diameter x 5/32" Pilot Drill Hole Type MS Counterbore 1/2" Shank

Brand: W L Fuller
Product Code: MS061568
Price: $74.28CAD $63.14CAD
Location Availability Min Qty
BC Warehouse 2 - 3 Weeks 1
Qty:  
   - OR -   

Discounted Shipping Calculated in the Checkout

WL Fuller Type MS Counterbore

Designed to cut clean holes in wood and plastic. Can also be used with stop collars. Counterbores for the flat under the heads of nails, spikes, and bolts. Allowing them to be sunk far enough beneath the surface to allow for a wood plug to be used to cover the head. Can be set at any point on a twist drill and held fast with two hex-socket set screws. Designed for clean cutting.

  • Made of Stainless Steel.
  • Have a 3” overall length and are designed for deep counterboring.
  • Can also be used with drill jig bushings.

Made in USA 

Write a review
Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad            Good

TESTIMONIALS

  • Reuben
    Re-Mov is a remarkable product...quickly breaks the bond between the adhesive and the surface allowing removal without damage to the product or the surface....in my case I had attached a depth sounder to the inside hull of my boat and the sounder failed...I was able to remove it and replace it with ..
    21/11/2022
  • Dr. David Matheson
    Excellent bit. Performed perfectly, even into plywood with NO tear out. Very satisfied. Excellent customer service & shipping speed...
    14/12/2021
  • Myrt Nitz
    Excellent customer service, really fast shipping and order accurate! I will continue shopping with you, thanks guys ..
    08/03/2018
  • Brent L
    Great blades,work great fast and friendly service. Didn't take them long to make and ship to Ontario ..
    19/04/2021
  • Dave Fraser
    Really great service, over night shipping was amazing. My order arrived in less than 24 hours. As a teacher this is a real plus. I will be ordering from Online supplies again, cheers...
    25/01/2019
  • Tom K.
    The Forstner bit that I ordered works very well and it arrived quickly. Thanks. I will be visiting your site again. ..
    14/01/2021
  • Pierre Ménard
    Bon produit, livré dans un délai raisonnable, aussi le prix était juste...
    09/09/2021
  • Brian
    Good company to deal with, good product and everything was on time...
    13/03/2025
  • Maurice Smith
    Little long getting ,but kept in touch all in all very good ..
    29/01/2019
  • Wade
    Placed my order a week after ordering the same think from KMS and recieved my shipment before my order from kms. ..
    02/02/2019
Skookum Tools Ltd. © 2025