Home » Drilling & Cutting » Countersinks » Countersink Components for Wood » Counterbore » 1-1/4" Diameter x 9/16" Pilot Drill Hole Type B Counterbore

1-1/4" Diameter x 9/16" Pilot Drill Hole Type B Counterbore

Brand: W L Fuller
Product Code: B9
Price: $117.09CAD $105.38CAD
Location Availability Min Qty
BC Warehouse 2 - 3 Weeks 1
Qty:  
   - OR -   

Discounted Shipping Calculated in the Checkout

WL Fuller Type B Counterbore

Counterbores for the flat under the heads of nails, spikes, and bolts. Allowing them to be sunk far enough beneath the surface to allow for a wood plug to be used to cover the head

Designed to cut clean holes in wood and plastic. Can also be used with stop collars. Counterbores for the flat under the heads of nails, spikes, and bolts. Allowing them to be sunk far enough beneath the surface to allow for a wood plug to be used to cover the head. Can be set at any point on a twist drill and held fast with two hex-socket set screws.

  • Designed for clean cutting.
  • Made of Carbon Steel and heat-treated for long tool life.
  • Made to cut clean holes in softwood.
  • Can be used with a stop collar to control the depth of cut.

Made in USA

 

Write a review
Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad            Good

Continue
Tags: 1-1/4", Diameter, 9/16", Pilot, Drill, Hole, Type, Counterbore, Fuller

TESTIMONIALS

  • Don Roach
    Searched everywhere (else) for a blade for my vintage B & B drill driven band saw. Skookum had it and it now cuts beautifully. Shipping was expensive...
    27/01/2024
  • Al K.
    When it comes down to band saw blades this is clearly the place to order from. However I was also in the market for 3 table saw blades. After sifting threw countless number of blades I found myself confused and frustrated. I ended up ordering from Lee Valley. Better descriptions and a some filter ..
    25/01/2019
  • Chris. Rochon
    The blade appears to be of excellent quality. The fit is perfect with no alignment problem. I appreciated the attached detail directions for first operation since they are somewhat different than the expected “norm” procedures. It would be nice if a smaller delay in shipping was possible since there..
    17/03/2021
  • Dr. David Matheson
    Excellent bit. Performed perfectly, even into plywood with NO tear out. Very satisfied. Excellent customer service & shipping speed...
    14/12/2021
  • Karl
    Very pleased with my blades Packed well and shipped to my home. Thank you I will be ordering again ..
    23/11/2021
  • Dennis
    Very pleased with the quick turn around. Was told will need to wait 3-4 weeks until product arrives before processing order. Received complete order in less then 2 weeks. Very satisfied with service and product...
    02/06/2022
  • Claude Isabel
    Très satisfait de mon achat. La livraison a été un peu longue car les produits étaient en attente. Je referai certainement affaire avec eux...
    22/09/2022
  • Reuben
    Re-Mov is a remarkable product...quickly breaks the bond between the adhesive and the surface allowing removal without damage to the product or the surface....in my case I had attached a depth sounder to the inside hull of my boat and the sounder failed...I was able to remove it and replace it with ..
    21/11/2022
  • Gerry
    The blade arrived in good shape and time. I have used it several times and it’s performing well. I have no complaints. ..
    12/08/2023
  • Dale Barber
    It was great. Never expected to find it so close to home and most of all in Canada. It only took about 2 days to get here. And the price was very reasonable. ..
    15/10/2020
Leave a Review
Skookum Tools Ltd. © 2024