Carbide Burrs (also known as Rotary Burrs) are used for cutting, shaping, grinding and for the removal of sharp edges, burrs and excess material (deburring).
1. What material can Carbide Burrs be used on?
Carbide burrs can be used on many materials. Metals including steel, aluminum and cast iron, all types of wood, acrylics, fibreglass and plastics. When used on soft metals such as gold, platinum and silver, carbide burrs are ideal as they will last a long time with no chipping or breaking.
- Steel, Carbon Steel & Stainless Steel
- Cast Iron
- Aluminium
- Titanium
- Cobalt
- Nickel
- Gold, Platinum & Silver
- Ceramics
- Fibreglass
- Plastic, Carbon Fiber Reinforced Plastic (CRP), Glass Fibre Reinforced Plastic (GRP)
- Brass, Copper & Bronze
- Zinc
- Wood
Different cuts of carbide burrs will be best suited to certain materials, see the next point below to find out about the different cuts.
What Do You Use Carbide Burrs In?
Ideally carbide burrs are used in Air Tools i.e Die Grinders, Pneumatic rotary tools and high speed engravers. Micro Motors, Pendant Drills, Flexible Shafts, and hobby rotary tools such as a Dremel.
Always use a handpiece that runs true i.e with no wobble.
Who Uses Carbide Burrs?
Carbide burrs are widely used for metalwork, tool making, engineering, model engineering, wood carving, jewellery making, welding, chamferring, casting, deburring, grinding, cylinder head porting and sculpting. And are used in the aerospace, automotive, dental, metal sculpting, and metal smith industries to name but a few.
2. Carbide Burrs Commonly Come in Two Cuts; Single Cut and Double Cut (Diamond Cut)
Single cut (one flute) carbide burrs have a right handed (Up cut) spiral flute. These tend to be used with stainless steel, hardened steel, copper, cast iron, and ferrous metals and will remove material quickly with a smooth finish. Use for heavy stock removal, milling, deburring and cleaning.
- Heavy removal of material
- Milling
- Deburring
- Cleaning
- Creates long chips
Double cut carbide burrs tend to be used on ferrous and non ferrous metals, aluminium, soft steel and also for all non-metal materials such as plastics and wood. They have more cutting edges and will remove material faster. Double cut are sometimes referrred to as Diamond Cut or Cross Cut (2 flutes cut across each other) will leave a smoother finish than single cut due to producing smaller chips as they cut away the material. Use for medium-light stock removal, deburring, finishing and cleaning. A double cut carbide burr is the most popular cut and will see you through most applications.
- Medium- light removal of material
- Deburring
- Fine finishing
- Cleaning
- Smooth finish
- Creates small chips
The below image indicates the double cut, single cut and again, the double cut or diamond cut.
Shank sizes of your carbide burrs:
The shank is the mount of your burr that fits into your rotary tool, die grinder, micro motor etc; so the opposite end to the working part of the tool. These are usually found in the following shank sizes:
- 1/16"
- 3/32"
- 1/8"
- 1/4"
Order Carbide Burrs
3. The Various Shapes of Carbide Burrs and How To Use Them
Making a decision on what shape to use will depend on the profile or cut you are looking to achieve.
These different shaped burs will get into many a nook and cranny and produce some interesting profiles.
Carbide Ball Burrs
Click HERE for Ball shape burrs
Use a ball or spherical shaped carbide burr to create concave cuts in your material or to shape and hollow out an area. Many wood carvers, stone carvers and metal engravers use these carbide carving burrs in a hobby drill, micro motor or a high speed handpiece. As we mentioned before, make sure to use a handpiece that runs true i.e with no wobble.
Carbide Tree Burrs
Click HERE for Pointed Tree shape burrs
Click HERE for Tree shape Radius End burrs
Use for rounding off edges and making concave cuts. Use the pointed end for cutting in hard to reach areas and acute angled contours.
Carbide Inverted Cone Burrs
Click HERE for Inverted Cone shape burrs
Use inverted cone shaped tungsten carbide burrs for making v-cuts and rear side chamfering.
Carbide Pointed Cone & Carbide Round Nose or Ball Nose Burrs
Click HERE for Pointed Cone shape burrs
Click HERE for Taper shape Radius End burrs
Good for rounded edges and surface finishing in difficult to reach areas or tight and narrow angles and contours. The round nose or ball nose cone are often referred to as a taper shape.
Cylinder Burrs. Round Nose/Ball nose/End Cut
Click HERE for Cylinder shape without End Cut
Click HERE for Cylinder shape with End Cut
Click HERE for Cylinder shape with Radius End
Choose from an end cut cylinder (with a cutting edge on the end) for contour finishing. Cylinder without end cut (flat on the end and no cutting edge) for contour finishing and right angled corners or a round nose or ball nose shape which is a cylinder shaped carbide burr but with a rounded head.
Oval Burrs
Click HERE for Oval shape burrs
Flame Burrs
Click HERE for Flame shape burrs
Countersink Burrs
Click HERE for 60° Countersink burrs
Click HERE for 90° Countersink burrs
Choose from 60 degree or 90 degree angle countersink burs, sometimes referred to carbide cone burrs. These are ideal for beveling, counterboring, chamfering and for getting into acute angled areas of your work.
4. What Speed or RPM should you use your Carbide Burrs?
The speed at which you use your carbide bur in your rotary tool will depend on the material you're using it on and the contour being produced but it's safe to say you do not need to exceed speeds of 35,000 RPM. The table below shows some approximate speeds.
If the burs are chipping easily this could be due to the speed being too slow. However, it's ideal to start the bur off slow, increasing the speed as you go along. High speeds will prevent clogging in the flutes of your burs.
| Diameter of Burr | RPM | |
| 1.6mm or 1/16" | 25,000 - 35,000 | |
| 2.35mm or 3/32" | 17,000 - 26,000 | |
| 3mm or 1/8" | 17,000 - 26,000 | |
| 6mm or 1/4" | 11,000 - 16,500 | |
| 12mm or 1/2" | 8,000 - 12,000 | |
| 16mm or 5/8" | 7,650 - 11,500 |
5. Do Not Apply Too Much Pressure
As with all drill bits and burrs, let the burr do the work and apply only a little pressure otherwise the cutting edges of the flutes will chip away or become smooth too quickly, reducing the life of your burr.
6. Carbide Burrs are Harder Than HSS Burrs
Our Carbide Burrs are machine ground from a specially chosen grade of carbide. Due to the extreme hardness of the Tungsten Carbide they can be used on much more demanding jobs than HSS (High Speed Steel).
Carbide Burrs also perform better at higher temperatures than HSS so you can run them hotter, and for longer.
HSS burrs will start to soften at higher temperatures so carbide is always a better choice for long term performance.
What Are The Advantages of Tungsten Carbide Burrs?
- Long life
- Use for long production runs
- High stock removal
- Ideal for using on many hard and tough materials
- Ideal for Deburring, finishing, carving, shaping and smoothing welds, moulds, dies and forgings
7. Keep The Carbide Burr On The Move
When using your carbide burr try not to keep it still for too long as this will prevent the burr from digging and jabbing into your material causing unsightly marks and roughness.
End on an 'up' stroke for a smoother finish to your work.
Helpful note: Using a carbide burr on Soft Cast iron is a great way to de-clog them.
Stay Safe:
- Always ensure your burr shank is well inserted into your collet and clamped down tightly
- Keep pressure light and keep the bur moving, focusing on the highest material first
- Ensure your work is secured tightly to your work bench
- Don't snag or jam your burr into your work
- Wear eye protection as a minimum, but better still use a full shield for your face
Posted by
Robert McDonald
Robert McDonald is the founder and president of Skookum Tools Ltd. and the driving force behind Online Supply, a premier e-commerce destination for industrial supplies, located at www.onlinesupply.ca. With over three decades of experience in the tooling and supply industry, Robert has cultivated a deep understanding of the unique needs of manufacturers, tradespeople, and hobbyists alike.
A passionate advocate for quality craftsmanship, Robert's journey began with a commitment to delivering top-tier tools and supplies to empower his customers to achieve exceptional results. From bandsaw blades and abrasives to router bits and end mills, Robert's expertise ensures that Online Supply offers a curated selection of reliable, high-performance products.
Robert enjoys sharing insights on efficiency, innovation, and industry trends. His writing reflects his dedication to helping customers succeed, whether they’re tackling DIY projects or managing large-scale industrial operations.
