1/4" Diameter 2 Flute 1-1/8" Cut 3" Length 1/4" Round Shank Single End Square Uncoated

Top Quality End Mills – Made in North America

For the full selection of carbide end mills, Click Here

 

Brand: Skookum End Mills
Product Code: 1321154
Price: $41.66CAD $33.33CAD
Location Availability Min Qty
Winnipeg Warehouse 7-10 Business Days 1
Qty:  
   - OR -   

Discounted Shipping Calculated in the Checkout

ULTRA High Performance Uncoated End Mills for Aluminum

• Special Helix Design
• Variable Pitch to reduce chatter
• 10% Extra Fine Sub-Micro Grain Carbide
with extremely high Transverse Rupture strength
• Diameter Tolerances: +0.0000”/-0.0015”

Write a review
Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad            Good

TESTIMONIALS

  • Cremona School
    As fine of retailer as I've ever experienced: honest and helpful and timely! Go!!!!!..
    30/12/2018
  • Rob
    I bought four Forstner Bits from 2" to 2 1/2". The place that I usually buy them from have been out of a s bunch of sizes all summer. In a search I found Skookum Tools. They had the bits I wanted and with shipping were the same price at the place I buy from. Shipping was on time and the bits were ..
    11/10/2020
  • Reuben
    Re-Mov is a remarkable product...quickly breaks the bond between the adhesive and the surface allowing removal without damage to the product or the surface....in my case I had attached a depth sounder to the inside hull of my boat and the sounder failed...I was able to remove it and replace it with ..
    21/11/2022
  • Todd Binner
    Ordered before took quite a few days this time was here in two days, great service thanks..
    09/08/2018
  • Alex
    Very fast service. I ordered 100 grit buffing compound. I usually order from another supplier but their shipping was a crazy price. Got just what I needed in a case lot. Will keep me going for quite a while..
    01/02/2024
  • Don Restall
    Good bandsaw blades at good prices,the service was very good...
    24/06/2020
  • Terry
    Great service ! Good to see the art of customer service is priority ! ..
    31/03/2020
  • M Byrne
    We ordered a roll of graphite and two graphite mitts. The products were as described and shipped expeditiously. If possible, it might be a good idea to develop a mitt with a heavy-duty wrist cuff. We use a wrist protector with the mitt because of the danger of the mitt slipping off the belt and..
    29/05/2020
  • Brian Styrczula
    0(zero) flute 82 degree counter sink, cuts metal like butter, fast delivery, thanks Ryan...
    16/07/2020
  • Eric
    Great blades great service...
    02/01/2021
Skookum Tools Ltd. © 2024