Royce Ayr

12 x 12 x 1.5 35-degree carbide knife insert ..

13 x 13 x 2.5 carbide knife insert (o) ..

Compression Spiral..

30 x 12 x 1.5 carbide knife insert ..

30 x 9 x 1.5 carbide knife insert ..

50 x 12 x 1.5 carbide knife insert  ..

Industrial non ferrous saw blades for cutting various shapes of aluminum and plastics teeth with hig..

Proline non ferrous saw blades economically priced saw for cutting aluminum and plastics for solids ..

Industrial Quality Dowel Drills  ART. D125 - 10 x 30 SHK. - 77mm O.A.L. ..

Pro-Line High Quality Metric Drill   ..

Solid Carbide Dowel Drills For use on CNC drill banks, and portable machines. Industrial quality ..

Solid Carbide Dowel Drills For use on CNC drill banks, and portable machines. Industrial quality ..

Solid Carbide Dowel Drills For use on CNC drill banks, and portable machines. Industrial quality ..

Solid Carbide Dowel Drills For use on CNC drill banks, and portable machines. Industrial quality ..

Pro-Line High Quality Metric Drill ..

Pro-Line High Quality Metric Drill ..

Solid Carbide Dowel Drills For use on CNC drill banks, and portable machines. Industrial quality ..

Solid Carbide Dowel Drills For use on CNC drill banks, and portable machines. Industrial quality ..

Best suited for cutting solids and thick walled tubes. The chamfered tooth sits 0.2mm to 0.3mm hi..

Corrugated heads for shapers and moulders. Steel bodies with precision machined 60º corrugations t..

A custom made knife insert for a very specific knife head (553CO.120-4W). Don't order this without a..

A custom made knife insert for a very specific knife head (553CO.120-4W). Don't order this without a..

Proline cut off “TCG” saw blades economically priced and designed for optimum blade life in laminate..

Dado shim set 1" arbour hole ..

Edge banding clipping saw blades designed to be used on automatic edge banding machines for clipping..

Howema system ..

Ultima Melamine saw blades – for precision sawing of panel material, high 30deg ATB helps prevent ch..

Custom 1/2” Saw Tooth Router Bit 0.5''D x x 1/4''Shank z=2 x Carbide Tipped Profiled Router ..

Onsrud 52-160 Router Bit Excellent for routing in hard plastics and aluminum. ..

Precision ER32 Collet for 1/4” Bits All collets conform to DIN 6388 standards. Collet should be s..

Custom Knife for Corrugated Shaper Cutter ..

Precision ER32 Collet for 3/8” Bits All collets conform to DIN 6388 standards. Collet should be s..

Accura HSS circular knives for rubber are made form a tough durable M-2 material. Blades can be m..

Accura HSS circular knives for rubber are made form a tough durable M-2 material. Blades can be m..

Accura HSS circular knives for rubber are made from High Speed Steel (HSS). Blades can be made wi..

360 Tooth Cold Saw Blade for Aluminum   ..

Best suited for cutting solids and thick walled tubes. The chamfered tooth sits 0.2mm to 0.3mm hi..

1” Carbide Tipped Bevel Bit with 9º Cutting Angle Diameter: 1" 2 Flute Shank: 1/2" Cutti..

Custom made 20mm Edge Bander Insert ..

..

Increase the arbour hole size to 1 inch on any blade with a smaller than 1” bore Does not apply t..

Increase the arbour hole size to 1.25 inch on any blade with a smaller than 1-1/4” bore ..

Increase the arbour hole size to 2 inch on any blade with a smaller than 2” bore ..

Increase the arbour hole size to 22mm on any split scoring blade with a smaller than 22mm bore   ..

Increase the arbour hole size to 3/4 inch on any blade with a smaller than 3/4” bore   ..

Increase the arbour hole size to 30mm on any blade with a smaller than 30mm bore Does not apply t..

Increase the arbour hole size to 32mm on any blade with a smaller than 30mm bore   ..

Increase the arbour hole size to 40mm on any blade with a smaller than 30mm bore   ..

Bore pinholes in  Royce Sawblade Indicate pinhole size and spacing in the comments ..

260mm (10-1/4”) M42 Tersa Knife Harder and more wear resistant than HSS and Chrome. M42 grade ..

Harder and more wear resistant than HSS and Chrome. M42 grade offers longer life in hardwoods and..

2 Flute “O” Style Downcut Slow Spiral Bit Excellent for routing both soft and hard plastics. ..

2 Flute Upcut Spiral Bit General purpose router for solid wood, wood composites and some plastics..

Single Flute Upcut “O” Style Hard Plastic Designed for routing hard plastics. Upcut design gives ..

Single Flute Veining Bit Excellent for carving and/or engraving in most materials ..

Single Flute Upcut “O” Style Soft Plastic Designed for routing soft plastics. Upcut design gives ..

Single Flute Downcut “O” Style Aluminum Designed for routing aluminum sheet and solid material on..

Single Flute Upcut “O” Style Aluminum Designed for routing aluminum sheet and solid material on C..

Single Flute Upcut “O” Style Hard Plastic Designed for routing hard plastics. Upcut design gives ..

Single Flute Upcut “O” Style Soft Plastic Designed for routing soft plastics. Upcut design gives ..

2 Flute Downcut Spiral Bit General purpose router for solid wood, wood composites and some plasti..

Solid Carbide Router..

Solid Carbide Router..

Fiberglass Burr Tool Burr style router bit for routing fiberglass and other reinforced plastic ma..

1 Flute Compression Spiral For routing laminated or veneered wood and wood composites when top an..

O-Flute Straight Cut Plastics..

Single Flute Upcut Spiral Hard Plastic & Aluminum Single flute Upcut tool good for routing hard p..

Fiberglass Rougher Finisher Burr Burr style router bit for routing fiberglass and other reinforce..

2 Flute Downcut Hard Plastic & Aluminum Bit Good for routing hard plastics and aluminum. End mill..

2 Flute Downcut Spiral Bit General purpose router for solid wood, wood composites and some plasti..

2 Flute “O” Style Straight Cut Bit Double wing O Flute designed for routing soft plastics ..

2 Flute “O” Style Straight Cut Bit Double wing O Flute designed for routing soft plastics ..

2 Flute Straight General Purpose Bit Suitable for routing solid wood, MDF and some plastics ..

2 Flute Straight General Purpose Bit Suitable for routing solid wood, MDF and some plastics ..

Upcut Bit for Aluminum & Hard Plastics Excellent for routing in hard plastics and aluminum. ..

4 Flute Combination Compression For routing laminated or veneered wood and wood composites when t..

4 Flute Compression For routing laminated or veneered wood and wood composites when top and botto..

1 Flute Compression Spiral For routing laminated or veneered wood and wood composites when top an..

2 Flute Upcut Ballnose Bit 5” overall length. General purpose for solid wood and wood composites...

3 Flute Downcut Spiral Bit Good for routing hard plastics and finish passes on solid woods. ..

2 Flute Downcut Spiral Bit General purpose router for solid wood, wood composites and some plasti..

2 Flute Upcut Spiral Bit General purpose router for solid wood, wood composites and some plastics..

2 Flute Straight Wood & Plastic Bit General purpose, good for routing solid wood and hard plastic..

2 Flute Upcut High Impact Bit General purpose router for solid wood, wood composites and some pla..

Upcut Spiral Ultimax..

3 Flute Downcut Phenolic Spiral Designed for routing phenolic and other fiber reinforced plastics..

3 Flute Downcut Phenolic Spiral Designed for routing phenolic and other fiber reinforced plastics..

3 Flute Upcut Phenolic Spiral Designed for routing phenolic and other fiber reinforced plastics, ..

3 Flute Upcut Phenolic Spiral Designed for routing phenolic and other fiber reinforced plastics, ..

2 Flute “O” Style Downcut Slow Spiral Bit Excellent for routing both soft and hard plastics. ..

1 Flute Compression Spiral For routing laminated or veneered wood and wood composites when top an..

1 Flute Compression Spiral For routing laminated or veneered wood and wood composites when top an..

Downcut Spiral Single Flute..

Single Flute Downcut “O” Style Aluminum Designed for routing aluminum sheet and solid material on..

Single Flute Upcut “O” Style Aluminum Designed for routing aluminum sheet and solid material on C..

Single Flute Upcut Soft Plastics Designed for routing soft plastic. ..

V-Flute Straight Cut..

2 Flute Compression Chipbreaker For routing laminated or veneered wood and wood composites when t..

2 Flute Compression Chipbreaker For routing laminated or veneered wood and wood composites when t..

2 Flute Compression Chipbreaker For routing laminated or veneered wood and wood composites when t..