Home » Drilling & Cutting » Hole Saws » Bi-Metal Hole Saws » Bi-Metal Hole Saw 3-5/8" Diameter

3-5/8" Bi-metal Holesaw

Overstock – Discontinued Item

Sales Limited to Stock on Hand Only

Brand: MPS Saws
Product Code: 5092
Price: $33.93CAD $14.50CAD
Location Availability Min Qty
BC Warehouse 2 1
MPS Saws DISCONTINUED 1
Qty:  
   - OR -   

Discounted Shipping Calculated in the Checkout

Heavy-Duty High speed Bi-Metal hole saw (M3) with variable tooth

The variable tooth design provides:

  • reduced vibration – therefore reduced heat creation whilst cutting = cleaner cut
  • higher rotation precision
  • more even cuts
  • cut depth to a max of 32mm or 1-1/4”

User Groups

Electricians, Plumbers, Framing Construction, Drywall and General shop use

Usage Tips

  • Use a good quality cutting oil when drilling metals
Write a review
Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad            Good

Continue
Tags: 3-5/8", Bi-metal, Holesaw, Bi-Metal, Hole, Saws, MPS

TESTIMONIALS

  • Susan Stewart
    Great stuff!.....worked well on outdoor patio!..
    03/06/2020
  • Eric Gutierrez
    I was able to get help quickly before ordering...amazing customer service. Great products, shipped quickly and at a good price. Very satisfied Eric..
    22/06/2020
  • Danny s.
    I've been dealing with Skookum Tools for over 5 years and have never been disappointed. Ordering is easy, delivery is fast and if there's ever an issue they are fast to deal with it and find a solution...
    03/01/2018
  • Chris. Rochon
    The blade appears to be of excellent quality. The fit is perfect with no alignment problem. I appreciated the attached detail directions for first operation since they are somewhat different than the expected “norm” procedures. It would be nice if a smaller delay in shipping was possible since there..
    17/03/2021
  • Kevin
    These belts lasted were well. They were strong and held together perfectly while sanding my deck...
    25/11/2022
  • Reuben
    Re-Mov is a remarkable product...quickly breaks the bond between the adhesive and the surface allowing removal without damage to the product or the surface....in my case I had attached a depth sounder to the inside hull of my boat and the sounder failed...I was able to remove it and replace it with ..
    21/11/2022
  • Gaetan
    J'ai acheté des scies à ruban sur mesures et ont été délivré à l'intérieur des dates prévues. Merci ..
    14/12/2022
  • Andrew
    We run a surgical services company. The belts I received were excellent. we used to order them from another company in the United States and at some point the belt backings became extremely paper thin and not exactly what we need. so these newer belts are about 0.020" thicker and are performing..
    02/04/2024
  • Norm
    Quality brand name products at an excellent price. Fast service and delivery...
    28/12/2018
  • M Byrne
    We ordered a roll of graphite and two graphite mitts. The products were as described and shipped expeditiously. If possible, it might be a good idea to develop a mitt with a heavy-duty wrist cuff. We use a wrist protector with the mitt because of the danger of the mitt slipping off the belt and..
    29/05/2020
Leave a Review

FAQ

What sizes of Bi-Metal Hole Saws are available?

We have bi-metal holesaws in sizes ranging from 9/16” through to 6” diameter. Check out the filter at the top of the Hole Saw page for a drop down selection of all the available sizes.

What are bi-metal hole saws used for?

Bi-Metal holesaws are versatile drilling tools and can be used in either a hand drill or a drill press. With a good quality hole saw and the correct drilling speed, you can make holes in steel, aluminum, wood, fibreglass, plastics and more! So for just about any application where you are looking to drill larger holes, a hole saw is most likely your best choice!

How do I choose the correct arbour or mandrel for my hole saw?

Industrial Hole Saw mandrels come in 2 basic categories; Small for hole saws from 9/16” through to 1-3/16” and Large for hole saws from 1-1/4” through to 6”. Make sure the shank size of the mandrel you are choosing with fit within the capacity of your drill chuck.

The most popular mandrels have a “Quick-Change” feature that makes switching out sizes of hole saws fast and easy.

Skookum Tools Ltd. © 2025