Sanding Sheet 3x4-1/4 Velcro PS33 Aluminum Oxide 120 Grit No Holes Klingspor 306646

Brand: Klingspor Abrasives
Product Code: 306646
Price: $1.00CAD $0.71CAD
Location Availability Min Qty
BC Warehouse Out Of Stock 100
Ontario Warehouse 100 100
Qty:  
   - OR -   

Discounted Shipping Calculated in the Checkout

PS 33 CK Strips With Paper Backing, Self-Fastening – for paint, varnish, filler, wood

 

Highly versatile – the abrasive strips PS 33 CK by Klingspor

The abrasive strips PS 33 CK by Klingspor are the perfect tool to process surfaces with great speed and efficiency. These abrasive strips are set apart by a high removal rate and perform exceedingly well during sanding on

  • paint
  • varnish
  • filler
  • wood

Klingspor manufactures the bulk of their PS 33 CK abrasives with coarse grit sizes. This abrasive is available both in different widths and lengths and without holes as well as with hole patterns GL 15, GL 17 and GL 18.

Klingspor PS 33 CK – a great choice for orbital sanders and hand sanding alike

The abrasive strips PS 33 CK come with a hook and loop surface that allows for easy fastening to orbital sanders that have a hook and loop backing pad. They are also a fine choice for hand sanding, where they deliver excellent performance when fitted on an abrasive block with hook and loop lamination. The product is guaranteed to deliver a high removal rate thanks to its hard and tough abrasive grain. The grain on this abrasive has been applied with an open coating. The spaces created by this coating between the individual grains allow for a quick discharge of the debris, thus preventing the abrasive strips from clogging during use. An open coating is therefore best suited for such applications as sanding wood and paint, which involve high removal rates.

The outer sides – a paper backing (C-paper) and a top coat made of synthetic resin

The backing Klingspor has selected for this product is a relatively light C-weight paper. This backing makes the abrasive strips PS 33 CK an effective tool, especially for sanding jobs that do not have to rely on a backing of great strength. A typical example of such applications is surface sanding of wood and paint, filler and varnish. The top size coat consists of synthetic resin. This material is standard at Klingspor, as it is used for all abrasives produced by the company. To ensure this coat has the same thickness throughout production, it is monitored by laser technology and weight measurements taken at random. This approach ensures that the abrasive belts, abrasive strips and other types of abrasives made by Klingspor will produce surface finishes that are uniform all the time.

Write a review
Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad            Good

TESTIMONIALS

  • Mike E
    The blade fits my experienced B/D hobby saw. It cuts well and I'm able to run the saw as it was intended with both tyres installed. I would like to note that both Ryan and Rob exceeded expectations in their service with me. My compliments to both. All on line vendors should take lessons. Thanks..
    15/09/2023
  • Jeppe
    Excellent quality bandsaw blades and extraordinary personal service from Skookum. I had the blades shipped overseas and it went without complications whatsoever. ..
    15/05/2025
  • jack reilly
    I have been buying bandsaw blades at Skookum for sometime. Always happy with the product. I ordered 4 special order in 2022 but didn't use them until 2024. They were the wrong length. One phone call was all it took to get free replacement blades. I offered to pay since it was my fault I hadn't check..
    22/06/2024
  • Blair
    Tried Skookum 1/2 inch end mills…. Excellent quality and performance! ..
    27/02/2025
  • Duc
    First time I ordered I was hesitant. But I did a small order and to my surprise I got the order writhing a week or two.. very short delivery time. Anyways I was happy with the product. I ordered again another time and had an issue with their payment system. I contacted and some one picked up and we..
    28/05/2024
  • Susan
    We ordered two different sizes of custom belts for a vintage sander owned by my husbands father who had passed. The belts are perfect and it’s so special to keep that sander going! The team was responsive and helpful anytime I asked questions. Thank you! ..
    26/01/2024
  • Milton
    Ordered a Melamine Saw Blade 9" x 60 Tooth x 3.0mm Kerf x 5/8" Bore Ultima Series .Arrived in good time and was well packaged so as to arrive in great condition. But most of all it cut melamine like butter with no chipping. Great blade ..
    13/03/2024
  • Lorne Upward
    Blades are great quality, run true , and cut very well. Had blades made to order . The production and shipping was fast...very satisfied with the product.!! ..
    04/10/2024
  • Rebecca
    These have been the best belts we've found for our needs. We are milling aluminum and use them on our belt sander to clean edges. They last much longer than other options we've tried prior! Fast shipment and great pricing. ..
    08/03/2024
Skookum Tools Ltd. © 2025