Resin Fibre Disc 7" x 7/8" Cs565 Zirconia 80 Grit Klingspor 6691

Brand: Klingspor Abrasives
Product Code: 6691
Price: $2.72CAD $2.04CAD
Location Availability Min Qty
BC Warehouse 25 25
Ontario Warehouse Normally In Stock 25
Qty:  
   - OR -   

Discounted Shipping Calculated in the Checkout

Klingspor Fibre Discs CS 565 – ideal for rough grinding applications 

 

The fibre discs CS 565 by Klingspor allows for quick and effective work - especially during rough grinding applications. Distinguished by a high level of aggressiveness and an outstanding price/performance ratio, these discs are a particularly good choice for use on

  • steel
  • metal and stainless steel
  • other types of metal

The CS 565 is available with a variety of grits, hole types and different diameters.

Aggressive and self-sharpening: the abrasive grain made of zirconia alumina

The Klingspor fibre discs CS 565 come with an abrasive grain made of zirconia alumina. This grain is exceedingly tough and hard and possesses a uniform crystalline structure. As they are self-sharpening, the discs are sure to deliver perfect grinding results over a long period of time. All types of abrasive grains used by Klingspor are made synthetically. This manufacturing process ensures that the products retain their properties and deliver consistently excellent quality over the course of their service life. The close coating of the blue abrasive material ensures a high removal rate as it covers nearly the entire surface of the fibre discs CS 565 with abrasive grain. Better still, the high coating density also guarantees a long service life. The coating combined with the self-sharpening zirconia alumina grain lets the user process steel, metal and stainless steel with minimal material use and, thus, at extra low cost.

The top coat: solid synthetic resin with great adhesive force

Just like any other abrasive made under the Klingspor brand, the fibre discs CS 565 come equipped with a synthetic resin top coat. Its high adhesive force creates a tight bond between the backing and the abrasive grain. The top coat made of solid synthetic resin also supports the abrasive grain while being subjected to the lateral forces generated during grinding. Klingspor applies laser technology and product-accompanying weight measurements to verify the uniformity of the top coat. This level of dedication invested in the top coat is just another testimony to the exquisite quality of every single Klingspor product.

Write a review
Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad            Good

TESTIMONIALS

  • Pierre Cantin
    faster than expected, everything perfect...
    31/05/2022
  • Ken Zorn
    Ordered a Flexback Bamdsaw blade. It arrived within stated time. Cuts in 3&1/4 in thick Birch were extremely smooth and required very little sanding. I would absolutely recommend this company. When needed I will order again from them...
    01/10/2021
  • Pierre Ménard
    Bon produit, livré dans un délai raisonnable, aussi le prix était juste...
    09/09/2021
  • Larry
    Thank you for your fast shipping and being reasonably priced. However the bandsaw blade length was a bit short but I was still able to use it via machine adjustment ...
    01/12/2021
  • Karl
    Great products, great service! ..
    01/01/2019
  • Dr Al Gerretsen
    Have used several of the blades. Made to the exact correct length. No flaws in the blades. Delivered in a box with each blade separated.. Blades are very sharp and work extremely well. Follow the directions on the tags...go a little slower to start with and the blade will last much longer...
    08/12/2018
  • Rodney Gustafson
    So far the order process is easy...
    07/09/2018
  • Lou
    Good company.I ordered 80 grit belts for stroke sander.Best belts I ever used.Little clogging and fast cutting.Great finish...
    18/06/2020
  • Colin
    Fair price for a great product. Shipping and delivery both excellent...
    22/08/2023
  • Jack L Quigley
    blade worked great. very satisfied..
    18/04/2022
Skookum Tools Ltd. © 2025