Resin Fibre Disc 7" x 7/8" Cs570 Zirconia 24 Grit Klingspor 204099

Brand: Klingspor Abrasives
Product Code: 204099
Price: $5.28CAD $3.85CAD
Location Availability Min Qty
BC Warehouse Out Of Stock 25
Ontario Warehouse Out Of Stock 25
Qty:  
   - OR -   

Discounted Shipping Calculated in the Checkout

Fibre Discs CS 570 – fibre discs that deliver a high removal rate on stainless steel, steel, NF metal and aluminium

 

Grinding work on metal presents a particularly daunting challenge to any abrasive. Metals prove to be difficult materials as they are tough, yet exceptionally hard at the same time. The most formidable of these metals are stainless steel and high-alloy steels, so-called super alloys. The fibre discs CS 570 tackle these challenges with an extra hard and ultra tough abrasive grain made of zirconia alumina that is bonded to a vulcanised fibre backing plate with a strong synthetic resin. The fibre disc CS 570 possesses characteristics that make it a particularly good choice for processing stainless steel and aluminium:

  • Cool grinding thanks to multibond
  • Close coating
  • Grain made of zirconia alumina

The self-sharpening effect provided by the zirconia alumina grain

The zirconia alumina used for the fibre discs CS 570 by Klingspor is a synthetically made grain with a crystalline structure that is exceptionally hard and tough. The sharp edges of natural abrasives made of quartz, emery or garnet wear out over time, resulting in reduced abrasive performance. Synthetically made zirconia alumina acts differently. Wear causes individual portions to break out of the crystalline structure, leaving behind new, sharp edges. This will result in a uniform scratch pattern at a continuous removal rate and a long service life.

Prevention of overheating

Fibre discs are perfect for use in high temperatures. The cool grinding ensured by the green multibond prevents premature overheating and discolouration of the metal on the workpiece, allowing for smooth operation even at a high contact pressure and high speeds. For safety reasons, the maximum operating speed of a fibre disc when fitted to a backing pad must not exceed 80 metres per second. The following permissible values are designed to keep the speed within this limit:

  • For discs with a diameter of 115 mm: 13,300 revolutions per minute
  • For discs with a diameter of 125 mm: 12,200 revolutions per minute
  • For discs with a diameter of 180 mm: 8,500 revolutions per minute

For use with the fibre discs CS 570

Available for the fibre discs CS 570 are matching backing pads, ST 358 A ribbed hard and ST 358 smooth medium. The backing pad must be selected according to the intended application. The medium backing pad is suited for applications requiring a uniform finish as it conforms perfectly to the contours of the workpiece. Its properties make this backing pad ideal for finer grinding work, surface grinding or grinding contours. The hard backing pad is used for rough grinding at high removal rates. It performs especially well when used for deburring and aggressive grinding.

Write a review
Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad            Good

TESTIMONIALS

  • Alex
    Very fast service. I ordered 100 grit buffing compound. I usually order from another supplier but their shipping was a crazy price. Got just what I needed in a case lot. Will keep me going for quite a while..
    01/02/2024
  • William Gellatly
    Excellent blades and even better customer service! It’s understandable that a 16” circular saw blade is custom order; what I didn’t expect was the emails keeping me apprised of the status of the build and shipping. Top notch!!!..
    27/05/2022
  • Ed Cotton
    Received the bandsaw blades promptly. Very happy with the product and service. Probably the best little bandsaw blades I have used for this saw. Thank You ..
    30/03/2024
  • James Joyce
    This is the 2nd time I have ordered bandsaw blades from this company. Very fast turn around, the blades arrived less than one week from ordering. Their costs, including shipping, are actually overall less expensive than obtaining blades from HomeDepot, Lowes or any other outlet that I have looked ..
    31/07/2018
  • Richard Pielou
    Great resaw blade for my 24" Bandsaw. Cuts nice and straight with no fuss!..
    28/08/2020
  • Andte Ouellette
    Excellent service, fast and efficient delivery. Highly recommended..
    02/08/2019
  • william harrington
    I live in the east & was quite impressed at the speed of delivery and the great packaging . The prices are good as well ...
    07/03/2019
  • P Drouin
    Highly satisfied with this product. Shipping is super fast. Happy to buy from a canadian source. The blades are of high quality. Much better than the cheap ones from B sy B e. Will buy again. Thanks...
    11/07/2019
  • Ron Chapman
    Was having trouble finding quality 114” fine toothed blades for a Craftex 14” band saw until I found your site. Ordered 2 blades at a reasonable price and even though they had to be manufactured for the order they arrived very quickly. Was very pleased with the quality and cutability of the blades. ..
    28/07/2019
  • Stephen K.
    Quick delivery. Excellent service. Thank you. ..
    09/08/2019
Skookum Tools Ltd. © 2025