Resin Fibre Disc 4-1/2" x 7/8" CS570 Zirconia with Grinding Aid 36 Grit Klingspor 204086

Brand: Klingspor Abrasives
Product Code: 204086
Price: $2.33CAD $1.69CAD
Location Availability Min Qty
BC Warehouse 3 - 4 Weeks 25
Ontario Warehouse 225 25
Qty:  
   - OR -   

Discounted Shipping Calculated in the Checkout

Fibre Discs CS 570 – fibre discs that deliver a high removal rate on stainless steel, steel, NF metal and aluminium

 

Grinding work on metal presents a particularly daunting challenge to any abrasive. Metals prove to be difficult materials as they are tough, yet exceptionally hard at the same time. The most formidable of these metals are stainless steel and high-alloy steels, so-called super alloys. The fibre discs CS 570 tackle these challenges with an extra hard and ultra tough abrasive grain made of zirconia alumina that is bonded to a vulcanised fibre backing plate with a strong synthetic resin. The fibre disc CS 570 possesses characteristics that make it a particularly good choice for processing stainless steel and aluminium:

  • Cool grinding thanks to multibond
  • Close coating
  • Grain made of zirconia alumina

The self-sharpening effect provided by the zirconia alumina grain

The zirconia alumina used for the fibre discs CS 570 by Klingspor is a synthetically made grain with a crystalline structure that is exceptionally hard and tough. The sharp edges of natural abrasives made of quartz, emery or garnet wear out over time, resulting in reduced abrasive performance. Synthetically made zirconia alumina acts differently. Wear causes individual portions to break out of the crystalline structure, leaving behind new, sharp edges. This will result in a uniform scratch pattern at a continuous removal rate and a long service life.

Prevention of overheating

Fibre discs are perfect for use in high temperatures. The cool grinding ensured by the green multibond prevents premature overheating and discolouration of the metal on the workpiece, allowing for smooth operation even at a high contact pressure and high speeds. For safety reasons, the maximum operating speed of a fibre disc when fitted to a backing pad must not exceed 80 metres per second. The following permissible values are designed to keep the speed within this limit:

  • For discs with a diameter of 115 mm: 13,300 revolutions per minute
  • For discs with a diameter of 125 mm: 12,200 revolutions per minute
  • For discs with a diameter of 180 mm: 8,500 revolutions per minute

For use with the fibre discs CS 570

Available for the fibre discs CS 570 are matching backing pads, ST 358 A ribbed hard and ST 358 smooth medium. The backing pad must be selected according to the intended application. The medium backing pad is suited for applications requiring a uniform finish as it conforms perfectly to the contours of the workpiece. Its properties make this backing pad ideal for finer grinding work, surface grinding or grinding contours. The hard backing pad is used for rough grinding at high removal rates. It performs especially well when used for deburring and aggressive grinding.

Write a review
Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad            Good

TESTIMONIALS

  • Tempest
    Even with the delays in Vancouver they did an awesome job getting my order to me as soon as possible! And they are awesome, nice clean cuts through the meat. Thank you!..
    14/12/2021
  • Danny s.
    I've been dealing with Skookum Tools for over 5 years and have never been disappointed. Ordering is easy, delivery is fast and if there's ever an issue they are fast to deal with it and find a solution...
    03/01/2018
  • MARTIN D STROUD
    Finally a place a can find Band saw blades for my old saw. good stuff..
    18/03/2023
  • Rebecca
    These have been the best belts we've found for our needs. We are milling aluminum and use them on our belt sander to clean edges. They last much longer than other options we've tried prior! Fast shipment and great pricing. ..
    08/03/2024
  • BRUCE
    It was good and works well..
    23/04/2020
  • John Wilson
    I have been fighting with my band saw for several years with mixed results. It has been difficult to get repeatable re-saw performance. For the first time on your advice we tried your double hardened blades and they work wondrously, a perfect straight cut every time! I used your advice and broke i..
    01/06/2021
  • Joe Routhier
    My sanding belt order went just great..The price / belt is super, and the quality is definitely there. Always my choice from now on. Thanks guys. ..
    23/01/2018
  • Mike
    I ordered a couple bandsaw blades, the shipped fast and arrived fairly quick to the north island. Nice blades at a nice price...
    01/02/2019
  • Don
    Awesome service Ryan go's above and beyond to help I will definitely getting my blades from them from now on ..
    29/03/2024
  • geraldo r campos
    Im Very happy whit , I spoke direct with sealer he seams very honesty about the shipping ( pandemic ), I do recommend this site ..
    21/05/2020
Skookum Tools Ltd. © 2025