Flap Disc 5" Diameter 7/8" Arbour Hole SMT314 40 Grit Klingspor 322815

Brand: Klingspor Abrasives
Product Code: 322815
Price: $13.68CAD $9.96CAD
Location Availability Min Qty
BC Warehouse Out Of Stock 10
Ontario Warehouse 40 10
Qty:  
   - OR -   

Discounted Shipping Calculated in the Checkout

SMT 314 Extra Abrasive Mop Discs – for steel, NF metals

 

SMT 314 Extra - abrasive mop disc for steel and NF metal

The abrasive mop disc SMT 314 Extra is the right choice for professional surface processing on

  • NF metal
  • steel
  • wood

This flap disc demonstrates its true capabilities when used on steel and NF metal. Its outstanding versatility and unparalleled performance capabilities make it a particularly popular choice in steel construction, plant engineering and fabrication facilities.

Excellent stock removal and a high removal rate

Another important aspect is the long service life of the tool. Eliminating the need for frequent tool changes, this performance characteristic contributes to smooth and efficient work results. This is due to the grain used for the abrasive disc. The zirconium grain is a self-sharpening material. During the grinding process, the grains constantly create fresh and sharp edges. A glass fibre backing plate forms the basis of this flap disc. While exceedingly strong, the material is flexible enough to stand up to even the toughest loads. What is more, it provides for optimum force transmission onto the workpiece. A member of the “Extra” product family, the abrasive mop disc SMT 314 offers an attractive price-performance ratio.

Convex shape for small surfaces

Boasting a 12° convex shape, the flap disc SMT 314 is the perfect tool when it comes to processing smaller surfaces areas such as edge or weld removal. Convex abrasive mop discs form a narrow abrasive surface are of abraisive and deliver a particularly high removal rate on account of the aggressive contact area. The abrasive discs are available in a variety of sizes and grits. They were developed specifically for use with high powered angle grinders.

The larger the abrasive disc, the lower the permissible speeds

The permissible speed of the SMT 314 flap disc depends on the diameter. The abrasive flaps are arranged in such a way that they will work with optimum efficiency throughout their lifetime. Instrumental to safety is the strong bond Klingspor created between the abrasive flaps and the backing plate of their flap discs.

Write a review
Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad            Good

TESTIMONIALS

  • Blair
    Tried Skookum 1/2 inch end mills…. Excellent quality and performance! ..
    27/02/2025
  • Lorne Upward
    Blades are great quality, run true , and cut very well. Had blades made to order . The production and shipping was fast...very satisfied with the product.!! ..
    04/10/2024
  • Duc
    First time I ordered I was hesitant. But I did a small order and to my surprise I got the order writhing a week or two.. very short delivery time. Anyways I was happy with the product. I ordered again another time and had an issue with their payment system. I contacted and some one picked up and we..
    28/05/2024
  • jack reilly
    I have been buying bandsaw blades at Skookum for sometime. Always happy with the product. I ordered 4 special order in 2022 but didn't use them until 2024. They were the wrong length. One phone call was all it took to get free replacement blades. I offered to pay since it was my fault I hadn't check..
    22/06/2024
  • Milton
    Ordered a Melamine Saw Blade 9" x 60 Tooth x 3.0mm Kerf x 5/8" Bore Ultima Series .Arrived in good time and was well packaged so as to arrive in great condition. But most of all it cut melamine like butter with no chipping. Great blade ..
    13/03/2024
  • Mike E
    The blade fits my experienced B/D hobby saw. It cuts well and I'm able to run the saw as it was intended with both tyres installed. I would like to note that both Ryan and Rob exceeded expectations in their service with me. My compliments to both. All on line vendors should take lessons. Thanks..
    15/09/2023
  • Rebecca
    These have been the best belts we've found for our needs. We are milling aluminum and use them on our belt sander to clean edges. They last much longer than other options we've tried prior! Fast shipment and great pricing. ..
    08/03/2024
  • Susan
    We ordered two different sizes of custom belts for a vintage sander owned by my husbands father who had passed. The belts are perfect and it’s so special to keep that sander going! The team was responsive and helpful anytime I asked questions. Thank you! ..
    26/01/2024
  • Jeppe
    Excellent quality bandsaw blades and extraordinary personal service from Skookum. I had the blades shipped overseas and it went without complications whatsoever. ..
    15/05/2025
Skookum Tools Ltd. © 2025