Cut Off Type 1 (Flat) 4-1/2 x .040(1mm) x 7/8 A60N for Aluminum Klingspor 264297

Brand: Klingspor Abrasives
Product Code: 264297
Price: $4.52CAD $3.17CAD
Location Availability Min Qty
BC Warehouse 31 25
Ontario Warehouse 2450 25
Qty:  
   - OR -   

A 60 N Supra Kronenflex – thin cutting-off wheel for aluminium

 

The A 60 N Supra is a thin cutting-off wheel that effectively prevents clogging thanks to its special composition. The cutting-off wheel is an excellent choice for work on

  • aluminium
  • steel

Boasting a design that is ideal for daily use on an angle grinder, the A 60 N Supra excels thanks to minimum burr formation and high aggressiveness combined with a service life that is above average. This thin cutting-off wheel is available in different diameters. It is equally recommended for use in the commercial sector and projects undertaken by hobby craftsmen.

Matching cutting-off wheels for many applications

The thin cutting-off wheel A 60 N is a member of the Supra quality class. Classified in this category are the products that Klingspor has optimised for particularly demanding tasks. These products are set apart by their outstanding service life and ultra high cutting performance. Aside from this category, Klingspor also offers the quality classes Extra and Special, which hold cutting-off wheels that are designed for universal use and special applications, respectively. All wheels designed for use on an angle grinder come with a glass fibre cloth that serves as a reinforcing insert and improves stability significantly. A glass fibre cloth is absolutely essential when the cutting-off wheel is subjected to great lateral forces. The thin cutting-off wheel relies on an equally thin glass fibre cloth to ensure a high concentration of abrasive grain.

Premium grains for optimum results

Klingspor makes exclusive use of synthetically made grains that are guaranteed to produce the best possible results. The user will enjoy consistently excellent quality throughout a long useful life and benefit from predictable wear and cutting characteristics. This thin cutting-off wheel included in Klingspor’s portfolio reaches its maximum capacity when used just below the maximum permissible operating speed. Exerting the right amount of tool pressure will ensure the fastest possible cutting time. If following these instructions, the user will produce optimum results, be gentle on the thin cutting-off wheel and contribute to their own safety.

Write a review
Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad            Good

Captcha



TESTIMONIALS

  • David perra
    Came fast nice quality I miss measured the length so I was in able to try them. But i am ordering the correct size Thank you..
    23/01/2019
  • Jason
    Excellent service! Will shop with them again!..
    08/05/2019
  • Claude C
    KN95 Health Canada approved disposable mask arrived yesterday. Very nice fit, easy to breathe through and comfortable...
    10/02/2021
  • Rob
    I bought four Forstner Bits from 2" to 2 1/2". The place that I usually buy them from have been out of a s bunch of sizes all summer. In a search I found Skookum Tools. They had the bits I wanted and with shipping were the same price at the place I buy from. Shipping was on time and the bits were ..
    11/10/2020
  • Jean
    Quickly shipping good blades good price ..
    29/06/2020
  • M Byrne
    We ordered a roll of graphite and two graphite mitts. The products were as described and shipped expeditiously. If possible, it might be a good idea to develop a mitt with a heavy-duty wrist cuff. We use a wrist protector with the mitt because of the danger of the mitt slipping off the belt and..
    29/05/2020
  • Todd Binner
    Ordered before took quite a few days this time was here in two days, great service thanks..
    09/08/2018
  • Lou
    Good company.I ordered 80 grit belts for stroke sander.Best belts I ever used.Little clogging and fast cutting.Great finish...
    18/06/2020
  • Chris. Rochon
    The blade appears to be of excellent quality. The fit is perfect with no alignment problem. I appreciated the attached detail directions for first operation since they are somewhat different than the expected “norm” procedures. It would be nice if a smaller delay in shipping was possible since there..
    17/03/2021
  • don brown
    much to my surprise the blades arrived early . As to the usage of them I have used these blades before and they are vastly superior to other manufactures. I highly recommend them..
    23/01/2019
Skookum Tools Ltd. © 2022