Countersinks
Premium USA Made Countersinks
Countersinks manufactured by WL Fuller. For more information on the different styles of countersinks, click here!
There are no products to list in this category.
C-Type Countersinks: Used to countersink and counterbore for the heads of screws in woods, plastics, and non-ferrous materials.
- Made of Carbon Steel and heat-treated for long tool life.
- Designed for use in all woods, plastics, and non- ferrous metals.
- Held in place with 2 hex socket set screws fastened into the flutes of the drill.
E-Type Countersinks: Used to countersink and counterbore deep holes in woods, plastics, and non-ferrous materials.
- Made of Carbon Steel and heat-treated for long tool life.
- Designed for deep hole countersinking and counterboring in woods, plastics, and non-ferrous metals.
J-Type Countersinks: Uses a 1/4” shank to fit regular drill chucks
- Reduces the breakage of small diameter drills.
- All J-Type countersinks are 1-1/2” overall length with 3/4” long shanks.
K-Type Countersinks: Made of Carbon Steel (K-Type) or Stainless Steel (KS-Type) and heat-treated for long tool life.
- All Type “K” countersinks are made of Carbon Steel
- All Type “KS” countersinks are made of Stainless Steel
- 3” OAL and are designed for deep countersinking.
- Can be used with a drill jig bushing.
HSS Countersinks: High Speed Steel Countersink for Wood, Plastic & Non-Ferrous Metal
- Designed to only sink the head of the screw flush with the surface, not to sink it deeper for plugging.
- Made with shorter blades to reduce breakage.
- Has a sharper relief to allow for better clearance of chips.
- Designed for extended tool life in abrasive materials like Fiberglass.
Carbide Countersinks: Used for use in metals and abrasive materials.
- Manufactured from Ferro-Tic® machinable carbide.
- Best used in Fermica, Fiberglass, Particleboard and other abrasive surfaces.
Countersinks,
Countersink,
Components,
for,
Wood