Carbide Tipped Boring Bit 25mm Diameter RH

We will confirm stock on Dimar products prior to processing orders.

Brand: Dimar
Product Code: 203B-25
Price: $66.55CAD $59.90CAD
Location Availability Min Qty
BC Warehouse Special Order - Delivery Varies 1
Dimar Canada To Be Confirmed 1
Qty:  
   - OR -   

Discounted Shipping Calculated in the Checkout

25mm Dia, Carbide Tipped, Boring Bit, Long, RH, 10mm Shank, 90mm Length

Dimar's Carbide Tipped Boring bits are engineered for accurate boring, the two wing and 2 spurs cutters prevent the bottom side from tearing out. 

  • With a center point, two straight teeth and two nicking teeth. 
  • Cuts most of the wood, veneer, laminate, and particleboard. 
  • Use only on drill press machines. 
  • Only available for RH= Right Hand. 
Number of Cutters 2
Diameter (D) 25mm
Shank (d) 10mm
Overall Length (L) 90mm
L1 30mm
Technology Carbide Tipped
Rotation Right Hand (RH)
Material Soft Wood, Hard Wood, Veneers, Laminate, Particle Boards
Tools Drill Press
Write a review
Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad            Good

TESTIMONIALS

  • Reuben
    Re-Mov is a remarkable product...quickly breaks the bond between the adhesive and the surface allowing removal without damage to the product or the surface....in my case I had attached a depth sounder to the inside hull of my boat and the sounder failed...I was able to remove it and replace it with ..
    21/11/2022
  • song
    excellent prices and item...
    17/01/2019
  • Colin
    Fair price for a great product. Shipping and delivery both excellent...
    22/08/2023
  • Andrew
    The automated shipping updates are very useful for organizing my material management. The responsiveness and efficiency of your operation is appreciated - and you were the only place I could find the exact sandpaper that I needed for the job...
    31/01/2019
  • Gary
    I ordered two types of sanding belts. They were delivered very quickly and are high quality...
    03/10/2018
  • Mike E
    The blade fits my experienced B/D hobby saw. It cuts well and I'm able to run the saw as it was intended with both tyres installed. I would like to note that both Ryan and Rob exceeded expectations in their service with me. My compliments to both. All on line vendors should take lessons. Thanks..
    15/09/2023
  • HUGH PARKS
    Received my order, on time, fair prices, quality blades, and courteous service, thanks. ..
    23/02/2019
  • Terry
    Always great products and great service with a live person, if needed !..
    02/09/2020
  • Dale Barber
    It was great. Never expected to find it so close to home and most of all in Canada. It only took about 2 days to get here. And the price was very reasonable. ..
    15/10/2020
  • Adam
    Product is exactly what it should be - also considerable cheaper and easier to get than the regular Red Label Abrasive brand I've used in the past. ..
    26/07/2021
Skookum Tools Ltd. © 2024
--> --> --> --> --> --> --> -->